GNU bug report logs -
#24129
RAID config boot hangs at [...] Clocksource: Switched to clocksource tsc
Previous Next
Reported by: myglc2 <myglc2 <at> gmail.com>
Date: Tue, 2 Aug 2016 01:54:02 UTC
Severity: normal
Done: ludo <at> gnu.org (Ludovic Courtès)
Bug is archived. No further changes may be made.
To add a comment to this bug, you must first unarchive it, by sending
a message to control AT debbugs.gnu.org, with unarchive 24129 in the body.
You can then email your comments to 24129 AT debbugs.gnu.org in the normal way.
Toggle the display of automated, internal messages from the tracker.
Report forwarded
to
bug-guix <at> gnu.org
:
bug#24129
; Package
guix
.
(Tue, 02 Aug 2016 01:54:02 GMT)
Full text and
rfc822 format available.
Acknowledgement sent
to
myglc2 <myglc2 <at> gmail.com>
:
New bug report received and forwarded. Copy sent to
bug-guix <at> gnu.org
.
(Tue, 02 Aug 2016 01:54:02 GMT)
Full text and
rfc822 format available.
Message #5 received at submit <at> debbugs.gnu.org (full text, mbox):
[Message part 1 (text/plain, inline)]
Note: I forgot that gmane is swallowing my posts to bug-guix and posted
this via gmane, so now I am resending by mail. Sorry if this duplicates!
I am attempting to set up RAID. First, following the doc, I ended up
with system39.scm, attached, excerpt below:
(operating-system
(host-name "g1")
(timezone "America/New_York")
(locale "en_US.utf8")
(bootloader (grub-configuration (device "/dev/sda")))
(initrd (lambda (fs . args)
(apply base-initrd fs
#:extra-modules '("raid1")
#:mapped-devices '((mapped-device
(source (list "/dev/sdb1" "/dev/sdc1"))
(target "/dev/md0")
(type raid-device-mapping)))
args)))
(file-systems (cons (file-system
(device "ssd-root")
(title 'label)
(mount-point "/")
(type "ext4"))
%base-file-systems))
In this config I was attempting to have the array assembled, but not
mounted after the boot. It did not look promissing that 'guix system
reconfigure system39.scm' did not assemble the array. Then as one might
expect, the resulting system boots but the array is not assembled.
After a couple helpful exchanges with Andreas on the devel list, I ended
up with system40.scm, attached, excerpt below:
(define md0
(mapped-device
(source (list "/dev/sdb1" "/dev/sdc1"))
(target "/dev/md0")
(type raid-device-mapping)))
(operating-system
(host-name "g1")
(timezone "America/New_York")
(locale "en_US.utf8")
(bootloader (grub-configuration (device "/dev/sda")))
(mapped-devices (list md0))
;; Add a kernel module for RAID-1.
(initrd (lambda (file-systems . rest)
(apply base-initrd file-systems
#:extra-modules '("raid1")
rest)))
(file-systems (cons*
(file-system
(device "ssd-root")
(title 'label)
(mount-point "/")
(type "ext4"))
(file-system
(title 'device)
(device "/dev/md0")
(dependencies (list md0))
(mount-point "/mnt/md0")
(create-mount-point? #t)
(type "ext4"))
%base-file-systems))
Here the intent is to have the array assembled and mounted after the
boot. It looked promissing when 'guix system reconfigure system40.scm'
assembled and mounted the array (see system40.log). But on reboot the
system hangs with the console showing:
[...] clocksource: Switched to clocksource tsc
And /var/log/sheperd.log contains:
2016-08-01 18:15:13 Service root has been started.
2016-08-01 18:15:13 ERROR: In procedure scm-error:
2016-08-01 18:15:13 ERROR: no code for module (gnu build file-systems)
2016-08-01 18:15:13
2016-08-01 18:15:13 Entering a new prompt. Type `,bt' for a backtrace or `,q' to continue.
2016-08-01 18:15:13 GNU Guile 2.0.11
2016-08-01 18:15:13 Copyright (C) 1995-2014 Free Software Foundation, Inc.
2016-08-01 18:15:13
2016-08-01 18:15:13 Guile comes with ABSOLUTELY NO WARRANTY; for details type `,show w'.
2016-08-01 18:15:13 This program is free software, and you are welcome to redistribute it
2016-08-01 18:15:13 under certain conditions; type `,show c' for details.
2016-08-01 18:15:13
2016-08-01 18:15:13 Enter `,help' for help.
For this config, /var/log/messages (messages40.log) is also attached.
TIA - George
[messages40.log (application/octet-stream, attachment)]
[system40.log (application/octet-stream, attachment)]
[system40.scm (application/octet-stream, attachment)]
[system39.scm (application/octet-stream, attachment)]
Reply sent
to
ludo <at> gnu.org (Ludovic Courtès)
:
You have taken responsibility.
(Tue, 02 Aug 2016 11:56:01 GMT)
Full text and
rfc822 format available.
Notification sent
to
myglc2 <myglc2 <at> gmail.com>
:
bug acknowledged by developer.
(Tue, 02 Aug 2016 11:56:01 GMT)
Full text and
rfc822 format available.
Message #10 received at 24129-done <at> debbugs.gnu.org (full text, mbox):
myglc2 <myglc2 <at> gmail.com> skribis:
> After a couple helpful exchanges with Andreas on the devel list, I ended
> up with system40.scm, attached, excerpt below:
>
> (define md0
> (mapped-device
> (source (list "/dev/sdb1" "/dev/sdc1"))
> (target "/dev/md0")
> (type raid-device-mapping)))
> (operating-system
> (host-name "g1")
> (timezone "America/New_York")
> (locale "en_US.utf8")
> (bootloader (grub-configuration (device "/dev/sda")))
> (mapped-devices (list md0))
> ;; Add a kernel module for RAID-1.
> (initrd (lambda (file-systems . rest)
> (apply base-initrd file-systems
> #:extra-modules '("raid1")
> rest)))
> (file-systems (cons*
> (file-system
> (device "ssd-root")
> (title 'label)
> (mount-point "/")
> (type "ext4"))
> (file-system
> (title 'device)
> (device "/dev/md0")
> (dependencies (list md0))
> (mount-point "/mnt/md0")
> (create-mount-point? #t)
> (type "ext4"))
> %base-file-systems))
>
>
> Here the intent is to have the array assembled and mounted after the
> boot. It looked promissing when 'guix system reconfigure system40.scm'
> assembled and mounted the array (see system40.log). But on reboot the
> system hangs with the console showing:
>
> [...] clocksource: Switched to clocksource tsc
>
> And /var/log/sheperd.log contains:
>
> 2016-08-01 18:15:13 Service root has been started.
> 2016-08-01 18:15:13 ERROR: In procedure scm-error:
> 2016-08-01 18:15:13 ERROR: no code for module (gnu build file-systems)
I believe this is fixed by dfe06f6e7f486eb42a2b71e9d0ae52dfe8e3bb26.
> 2016-08-01 18:15:13 Entering a new prompt. Type `,bt' for a backtrace or `,q' to continue.
> 2016-08-01 18:15:13 GNU Guile 2.0.11
> 2016-08-01 18:15:13 Copyright (C) 1995-2014 Free Software Foundation, Inc.
> 2016-08-01 18:15:13
> 2016-08-01 18:15:13 Guile comes with ABSOLUTELY NO WARRANTY; for details type `,show w'.
> 2016-08-01 18:15:13 This program is free software, and you are welcome to redistribute it
> 2016-08-01 18:15:13 under certain conditions; type `,show c' for details.
> 2016-08-01 18:15:13
> 2016-08-01 18:15:13 Enter `,help' for help.
This is another bug that has yet to be fixed:
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=23697
Thanks for your report!
Ludo’.
Information forwarded
to
bug-guix <at> gnu.org
:
bug#24129
; Package
guix
.
(Sat, 06 Aug 2016 02:51:02 GMT)
Full text and
rfc822 format available.
Message #13 received at submit <at> debbugs.gnu.org (full text, mbox):
[Message part 1 (text/plain, inline)]
myglc2 <myglc2 <at> gmail.com> writes:
>
> And /var/log/sheperd.log contains:
>
> 2016-08-01 18:15:13 Service root has been started.
> 2016-08-01 18:15:13 ERROR: In procedure scm-error:
> 2016-08-01 18:15:13 ERROR: no code for module (gnu build file-systems)
In a valiant effort at self help I read the line above and thought
... maybe I should add ...
(use-modules (gnu build file-systems))
... to the config (system41.scm)
Unfortunately this didn't fix things but it did produce an interesting
result: 'guix system reconfigure system41.scm' hung but added new
generation. Hey! guix is not supposed to do that. I want my money back!!
Interestingly, when I set --verbosity=5, 'guix system ...' failed and
refrained from adding a new generation.
So, no fix, but maybe a wormhole to plug ;-)
Log attached.
[system41.scm (application/octet-stream, attachment)]
[system41.log (application/octet-stream, attachment)]
bug archived.
Request was from
Debbugs Internal Request <help-debbugs <at> gnu.org>
to
internal_control <at> debbugs.gnu.org
.
(Sat, 03 Sep 2016 11:24:04 GMT)
Full text and
rfc822 format available.
This bug report was last modified 7 years and 237 days ago.
Previous Next
GNU bug tracking system
Copyright (C) 1999 Darren O. Benham,
1997,2003 nCipher Corporation Ltd,
1994-97 Ian Jackson.